|
CMZ provide you with the widest range of Bending Rolls in europe. Manual Bending Rolls (Bench & Stand) | Mechanical 3 Roll | Mechanical 4 Roll | Hydraulic 3 Roll | Hydraulic 4 Roll High Production Hydraulic Roll CNC) | Pneumatically controlled Hydraulic (CNC) with Top Roll (raise and lowering) for High Speed Production
|
|
 A range of hand operated bench mounted machines with small diameter rolls.
Designed for rolling thin gauge and soft material, they are particularly suited for the manufacturers of filters.
The material is formed around the top roll which is held in tension at one end. Upon removal of link arm the roll lifts upwards enabling the formed tube to be removed. The roll can then be without the need of adjustment thus making fast repetition work possible. Click here to view the full specification |
|
We are pleased to offer our range of manual operated bending rolls. These rolls are rugged in structure and built to operate on maximum capacities and will provide consistent profiles in keeping with metalworkers' expectations. Minimum diameters average out at 1.5 x top roll dia. though you will appreciate much depends on width and thickness of work part and of course the material, i.e. mild or stainless steel, aluminium, etc., etc. |
|
Read more... [CMZ Manual (Top Slip) Initial Pinch Assymetrical bending Rolls]
|
|
We are pleased to offer our range of power operated bending rolls. These rolls are rugged in structure and built to operate on maximum capacities and will provide consistent profiles in keeping with metalworkers expectations. Minimum diameters average out at 1.5 x top roll dia. though you will appreciate much depends on width and thickness of work part and of course the material ie., mild or stainless steel, aluminium etc., etc., |
|
Read more... [CMZ power top slip bending rolls]
|
|
The A3 series of power rolls are of the highest quality, built in robust design, with 3 asymmetric rollers, which permit quality cylinder forming, with added feature of double pinching which can be achieved by overturning the workpiece sheet. The lower roller is adjusted by means on an eccentric. Raising & lowering of side roller by means of a worm driven geared hand wheel. Features - Motorised (Rotation) top and bottom
rollers. - Top slip clamped for easy slip-out
work removal. - Rear and lower rollers equipped with
grooves for wired or flanged edges. - Separate electrical control panel
- CE Standard electrical & safety
protection
Click here to view full specification |
|
The series 31 range are a medium duty range and having three asymmetrical rollers with pre-bending enables complete accurate forming of cylinders. The asymmetric arrangement requires the overturning of the sheet or plate. This range is for the heavier duty work and will prove excellent “work horses” for work in the most arduous conditions. As can be seen the range is extensive, and well supported by several standard features. There are also numerous options by way of extras, we are at your service for any help or advice needed in this aspect. 
Features: - Central powered rollers (rotation wise)
- Motorised raising and lowering of side roller
- Self brake motor
- Centralised lubricating unit.
- Separate electric control panel
- Electrical equipment housed in a suitable control cabinet
- CE standard electrical and safety protection.
Click here to view full specification |
|
The Q41 range featured, being 4 rolls, allows flat ends to be eliminated, output is also considerable increased especially by using the four roll as a back gauge, this saves two operators time as one operator can simply feed sheet into fourth roll to indicate amount of material being required. 
Features: - Central Powered rollers
- Release and lifting of top roller by console control.
- Raising & lowering of the side rollers through worm reduction gears.
- Reduction gears in oil bath
- Self-brake motor (excluding modesl Q411-Q412)
- Separate electric control
- Electrical equipment housed in a suitable control cabinet.
- Safety measures to CE specifications
Click here to view full specification |
|
|
The CPI series with partial pre-bending are very popular due to their rugged construction, simple but effective design and built by professionals who specialise in manufacturing bending rolls only. These machines are excellent value for money and you will find the price very competitive for a machine which is to the forefront of Western European equipment. With these machines it is possible to reduce the flat end of the sheet almost to zero. The only machine to improve on the CPI is to think of our Q1 Four roller models. 
Features: - Motorised side rollers
- Upper idler roller mounted in roller bearings.
- Tilting and parallel adjustment of the side rollers controlled from the control panel.
- Release and lifting of the upper roller controlled from the control panel.
- Motorisation by means of hydraulic motor and epicyclic reduction rear.
- Centralised lubrication
- Overload protection
- CE Certified
Click here to see full specification |
|
The Q1 series of 4 roller machines are without doubt the most advanced solution for cold bending of sheet or plate. Particularly suitable for quantity production rates can be achieved with the aid of CNC, together with side and central supports. The fourth roll plays a most important role both by utilising superior work pieces, whereby flats are eliminated and for use as a backgauge for ensuring “squareness” of plate. 
Features: - Motorised central rollers
- Side idler rollers mounted in roller bearings.
- Tilting and parallel adjustment of the side rollers controlled from the control panel.
- Release and lifting of the upper roller controlled from the control panel.
- Motorisation with hydraulic motor and epicyclic reduction gear.
- Centralised lubrication system
- Overload protection
- CE certified.
Click here to view full specification |
|
Here we have the alternative FAMAR pneumatic version of the automatic 4 roll machine. These models are intended for the lighter sheets and makes for large savings, as opposed to the hydraulic versions which become necessary when producing from heavier plates. The QAP series were designed with the hydraulic series and claim the same production rates bearing in mind of course you are catering for the lighter gauge sheets.
 - Powered central rolls
- Raising and lowering of the side rolls by means of D.C. motor driven
actuator with ball recycling screw - 2 axes CNC control
- Raising and lowering of the bottom roll and top roll release by means of pneumatic piston
- Hardened rolls.
Click here to view specification |
|
|
|
|
|
Bending Rolls
