A range of hand operated bench mounted machines with small diameter rolls.
Designed for rolling thin gauge and soft material, they are particularly suited for the manufacturers of filters.
The material is formed around the top roll which is held in tension at one end. Upon removal of link arm the roll lifts upwards enabling the formed tube to be removed. The roll can then be without the need of adjustment thus making fast repetition work possible.

Click here to view the full specification

We are pleased to offer our range of manual operated bending rolls.  These rolls are rugged in structure and built to operate on maximum capacities and will provide consistent profiles in keeping with metalworkers' expectations.  Minimum diameters average out at 1.5 x top roll dia. though you will appreciate much depends on width and thickness of work part and of course the material, i.e. mild or stainless steel, aluminium, etc., etc.

We  are pleased to offer our range of power operated bending rolls.  These rolls are rugged in structure and built to operate on maximum capacities and will provide consistent profiles in keeping with metalworkers expectations.  Minimum diameters average out at 1.5 x top roll dia. though you will appreciate much depends on width and thickness of work part and of course the material ie., mild or stainless steel, aluminium etc., etc.,

Attention is drawn to the advantage of these  “top slip” roll machines  over bottom slip.  With top slip there are no restrictions on cylinder sizes.  This combined with the “Pinch” facility assures the user of quality cylinders.

Click here to view full specification

Attention is drawn to the advantage of these  “top slip” roll machines  over bottom slip.  With top slip there are no
restrictions on cylinder sizes.  This combined with the “Pinch” facility assures the user of quality cylinders.

Features 

The CMZ range are equipped with a unique single lever action parallel adjustment for material thickness setting.

Carbon steel rolls | Single movement clampand release. | Bottom and back rolls grooved for wired edged.

Optional Extras

Cone bending attachment | Parallel motion to back roll | Hardened or coated rolls

Click here to view the full specification

These CMZ Bending rolls are superb quality, as are all CMZ  products, and with the feature of Top Slip Rolling, at the similar price of bottom slip rolls, they make excellent “Value for Money”.
Attention is drawn to the advantage of these “Top slip” roll machines over bottom slip, with top slip there are no restrictions on cylinder sizes.

Click here to view full specification

Attention is drawn to the advantage of these “Top slip” roll machines over bottom slip, with top slip there are no restrictions on cylinder sizes, this combined with the “pinch” facility assures the user of quality cylinders.

Click here to view the full specifications

The A3 series of power rolls are of the highest quality, built in robust design, with 3 asymmetric rollers, which permit quality cylinder forming, with added feature of double pinching which can be achieved by overturning the workpiece sheet.  The lower roller is adjusted by means on an eccentric.  Raising & lowering of side roller by means of a worm driven geared hand wheel.

Features

• Motorised (Rotation) top and bottom
  rollers.
• Top slip clamped for easy slip-out
  work removal.
• Rear and lower rollers equipped with
  grooves for wired or flanged edges.
• Separate electrical control panel
• CE Standard electrical & safety
  protection

Click here to view full specification

The series 31 range are a medium duty range and having three asymmetrical rollers with pre-bending enables complete accurate forming of cylinders.  The asymmetric arrangement requires the overturning of the sheet or plate.  This range is for the heavier duty work and will prove excellent “work horses” for work in the most arduous conditions.  As can be seen the range is extensive, and well supported by several standard features.  There are also numerous options by way of extras, we are at your service for any help or advice needed in this aspect.

Features:

• Central powered rollers (rotation wise)
• Motorised raising and lowering of side roller
• Self brake motor
• Centralised lubricating unit.
• Separate electric control panel
• Electrical equipment housed in a suitable control cabinet
• CE standard electrical and safety protection.

Click here to view full specification

The Q41 range featured, being 4 rolls, allows flat ends to be eliminated, output is also considerable increased especially by using the four roll as a back gauge, this saves two operators time as one operator can simply feed sheet into fourth roll to indicate amount of material being required.

Features:

• Central Powered rollers
• Release and lifting of top roller by console control.
• Raising & lowering of the side rollers through worm reduction gears.
• Reduction gears in oil bath
• Self-brake motor (excluding modesl Q411-Q412)
• Separate electric control
• Electrical equipment housed in a suitable control cabinet.
• Safety measures to CE specifications

Click here to view full specification

 The CPI series with partial pre-bending are very popular due to their rugged construction, simple but effective design and built by professionals who specialise in manufacturing bending rolls only.  These machines are excellent value for money and you will find the price very competitive for a machine which is to the forefront of Western European equipment.  With these machines it is possible to reduce the flat end of the sheet almost to zero.  The only machine to improve on the CPI is to think of our Q1 Four roller models.

Features:

• Motorised side rollers
• Upper idler roller mounted in roller bearings.
• Tilting and parallel adjustment of the side rollers controlled from the control panel.
• Release and lifting of the upper roller controlled from the control panel.
• Motorisation by means of hydraulic motor and epicyclic reduction rear.
• Centralised lubrication
• Overload protection
• CE Certified

Click here to see full specification

We are pleased to offer a range of bending rolls which contain all the features expected of quality equipment which we are known for.  Complete with hardened rollers, Easy top slip roll removal etc, and combined with a unique hydraulic drive, make these bending rolls a most desirable piece of equipment for any workshop. A feature of these machines with the 3 driven rollers you have the ability to produce minimum diameters of 1.4 x top roll dia. (full width).

Features:

• Minimum diameters (full width) 1.4 x top roll dia.
• All 3 rollers driven (rotation wise) by hydraulic system.  (A  B  C)
• Side/Back bending roller (C) is powered  (raise & lower) by hydraulic system
• The above roller (C)  has a digital counter showing roller pinching position.
• Bottom roller (B) raised & lowered synchrously by handwheel.  This movement is for  varying thicknesses to be worked on.
• All rolls are made of top-grade alloy steel hardened up  to HRC55°
• Rigid construction for precise and smooth operation, and long life time usage
• The top roll ( A ) can be swivelled out for easy removal of the finished workpiece
• Footswitch for forward/reverse, fitted with a protective housing.

Click here to see full specification